I’ve been playing around with v6.13rc12 over the last week on a CRS125-24G-1S and have put together a an example script for provisioning the unit with a user-vlan and an admin-vlan that are trunked back via the SFP port.
I’ve been waiting for a long time to have a usable and readable switch chip config on the CRS platform, so I hope this is useful for some of you guys too.
In the config:
- vlan20 is the user facing vlan (untagged on ether1-24, tagged on sfp1)
- vlan10 is the admin vlan (tagged on sfp1)
- vlan10 is attached to the router cpu
- 10.0.0.2/24 is assigned to vlan10
- 10.0.0.1 is set as the default gateway
/interface vlan add interface=sfp1 l2mtu=1584 name=vlan10 vlan-id=10 /interface ethernet set [ find default-name=ether1 ] master-port=sfp1 set [ find default-name=ether2 ] master-port=sfp1 set [ find default-name=ether3 ] master-port=sfp1 set [ find default-name=ether4 ] master-port=sfp1 set [ find default-name=ether5 ] master-port=sfp1 set [ find default-name=ether6 ] master-port=sfp1 set [ find default-name=ether7 ] master-port=sfp1 set [ find default-name=ether8 ] master-port=sfp1 set [ find default-name=ether9 ] master-port=sfp1 set [ find default-name=ether10 ] master-port=sfp1 set [ find default-name=ether11 ] master-port=sfp1 set [ find default-name=ether12 ] master-port=sfp1 set [ find default-name=ether13 ] master-port=sfp1 set [ find default-name=ether14 ] master-port=sfp1 set [ find default-name=ether15 ] master-port=sfp1 set [ find default-name=ether16 ] master-port=sfp1 set [ find default-name=ether17 ] master-port=sfp1 set [ find default-name=ether18 ] master-port=sfp1 set [ find default-name=ether19 ] master-port=sfp1 set [ find default-name=ether20 ] master-port=sfp1 set [ find default-name=ether21 ] master-port=sfp1 set [ find default-name=ether22 ] master-port=sfp1 set [ find default-name=ether23 ] master-port=sfp1 set [ find default-name=ether24 ] master-port=sfp1 /interface ethernet switch egress-vlan-tag add tagged-ports=sfp1 vlan-id=20 add tagged-ports=sfp1,switch1-cpu vlan-id=10 /interface ethernet switch ingress-vlan-translation add new-customer-vid=20 ports=ether1 sa-learning=yes add new-customer-vid=20 ports=ether2 sa-learning=yes add new-customer-vid=20 ports=ether3 sa-learning=yes add new-customer-vid=20 ports=ether4 sa-learning=yes add new-customer-vid=20 ports=ether5 sa-learning=yes add new-customer-vid=20 ports=ether6 sa-learning=yes add new-customer-vid=20 ports=ether7 sa-learning=yes add new-customer-vid=20 ports=ether8 sa-learning=yes add new-customer-vid=20 ports=ether9 sa-learning=yes add new-customer-vid=20 ports=ether10 sa-learning=yes add new-customer-vid=20 ports=ether11 sa-learning=yes add new-customer-vid=20 ports=ether12 sa-learning=yes add new-customer-vid=20 ports=ether13 sa-learning=yes add new-customer-vid=20 ports=ether14 sa-learning=yes add new-customer-vid=20 ports=ether15 sa-learning=yes add new-customer-vid=20 ports=ether16 sa-learning=yes add new-customer-vid=20 ports=ether17 sa-learning=yes add new-customer-vid=20 ports=ether18 sa-learning=yes add new-customer-vid=20 ports=ether19 sa-learning=yes add new-customer-vid=20 ports=ether20 sa-learning=yes add new-customer-vid=20 ports=ether21 sa-learning=yes add new-customer-vid=20 ports=ether22 sa-learning=yes add new-customer-vid=20 ports=ether23 sa-learning=yes add new-customer-vid=20 ports=ether24 sa-learning=yes /ip address add address=10.0.0.2/24 interface=vlan10 network=10.0.0.0 /ip route add dst-address=0.0.0.0/0 gateway=10.0.0.1
Advertisement